Skip to content
← Engineering notes

Building a hardware product in India

WPC, TEC and BIS: which approvals a connected product may need in India

14 November 2026 · Shalaka engineering team

A connected product sold in India may need more than one approval, and teams often discover this after the design is frozen. This note is a general orientation only. It is not legal advice, and it does not say what your product needs.

What each body covers, at a high level

WPC (Wireless Planning and Coordination wing, Department of Telecommunications). It deals with radio spectrum. Products that transmit on radio, such as Wi-Fi, Bluetooth, LoRa, cellular or proprietary sub-GHz links, may need equipment authorisation, and some frequency bands are licence-exempt while others are not. Whether a given module and band qualify depends on the product and on current rules.

TEC (Telecommunication Engineering Centre). It runs the mandatory testing and certification scheme for certain telecom equipment, and the product categories covered have changed over time. Whether your device falls under a category depends on what it does and how it connects to networks.

BIS (Bureau of Indian Standards). It runs compulsory registration for specified product categories, tested against the relevant Indian Standard at a recognised lab. Categories have included power adapters, certain lighting products and some consumer electronics. A connected product may touch BIS through its power supply, its battery or the device itself.

Why modules help but do not finish the job

Using a pre-certified radio module can reduce testing effort, because the module carries test reports for its radio. It does not transfer approval to your finished product automatically. Antenna type, enclosure, power supply and intended use can all affect what the end product needs. Ask the module vendor for its documents, and check whether they are valid for India.

How to find out what applies

  1. Write down the product: radios and bands, power source, mains connection, intended users and where it will be sold.
  2. Contact an accredited test lab in India and ask for their view on which schemes apply. Labs deal with this every day and can tell you the current position.
  3. Check the official portals of the relevant bodies for current notices, scope and procedures.
  4. Plan test samples and lab slots into the project schedule, and finalise radio and power choices early, since changes after testing can trigger retesting.

What this note does not do

It does not list fees, timelines or the exact standards for any product, because these differ by product and change. Requirements are revised, and a note written today can be out of date by next year. Treat it as a checklist of questions for your lab, not as an answer.

Last checked: November 2026


If you are planning a connected product for India and want hardware choices that leave room for approvals, book a discovery call. See production support and PCB design. On radio choice, read Wi-Fi, BLE, LoRa and LTE Cat 1 in India.

Tell us what you are building.

A 30-minute discovery call with an engineer. We reply within 48 hours.

Book a discovery call