Skip to content
← Engineering notes

Micro-apps and AI agents

Watching your BoM for end-of-life and shortage notices before they stop production

14 November 2026 · Shalaka engineering team

A BoM is checked carefully once, at design time. After that it ages. Manufacturers retire parts, change a process or a package, and distributors run out of stock. The first sign is often a purchase order that cannot be filled, when the only options left are an expensive broker or a stopped line.

Three kinds of notice

Lifecycle status. Distributor and manufacturer data typically label a part as active, not recommended for new designs (NRND), last time buy, or obsolete. NRND is the early warning. It rarely stops supply that quarter, but it tells you the part has a limited future.

Product change notifications. A PCN says something about the part is changing: the fab site, the die, the package material, the marking. Many are harmless. A change from one wafer fab to another is typical. Some change behaviour you depend on, such as a regulator’s start-up time or a flash part’s timing. Each one needs an engineer to read it against how the part is used.

End-of-life notices. These give a last-time-buy date and a last-shipment date. The window is finite, so the decision on how many to buy has to be made early, with a forecast and the cost of holding stock.

Shortage is separate. Lead times of 26 weeks or more became common for some parts in 2021 and 2022. A part can be active and still have long lead times or no stock. For each BoM line it helps to track stock across several distributors, not one.

What each BoM line should carry

  • Manufacturer part number, package and a lifecycle status with the date it was last checked.
  • The number of approved second sources, and whether they are drop-in or need a layout change.
  • Whether the part is single-source by nature, which is common for microcontrollers, radio modules and some sensors.
  • Annual usage in pieces, so a last-time buy can be sized.

Passives in 0402 or 0603 packages usually have many sources. Parts with no second source and a status other than active go to the top of the list.

How we would build a watch

A part availability watch reads your BoM, checks each line against distributor stock and lifecycle data on a schedule, and keeps the history. When a status changes, or stock for a line falls below a threshold you set, it sends a message to the person who owns that product. The message names the part, the products that use it, and the alternatives already on file. Where an AI agent helps is in reading PCN documents and summarising what changed, with the engineer deciding what to do.

What it does not fix

Data from distributors is not always current, and a manufacturer notice can reach you before the data feeds do. A watch lowers the chance of being surprised, but it does not replace a relationship with your manufacturer’s sales contact or a distributor. It also cannot create a second source. If a part has none, the fix is a design change, and that needs time before the notice arrives.


If a single part could stop your line, we can build an availability watch around your BoM, see micro-apps for electronics and manufacturing or book a discovery call.

Tell us what you are building.

A 30-minute discovery call with an engineer. We reply within 48 hours.

Book a discovery call